Introduction:
Cable Fault Locator HYCF-2002 can accurately and quickly detect the main insulation failure of power cables with voltage levels of 35KV and below. It can calibrate the length of the cable and accurately detect the direction and depth of the buried cable.
Main technical parameter
Cable Fault Flash Tester (Cable fault pre-locator)
★ Industrial grade 5.7 LCD display---Angle view>160, Working conditions: temperature: -10 ºC ~ +45 ºC
★ SCM centralized control, push button operation mode,
with strong anti-interference ability.
★ With distance, speed and resistance measurement function.
★ With Micro-printer can print out the wave form and measuring results
★ Automatic continuous sampling and never lose any discharge waveform.
★ Testing method: flashover sampling, low-impulse method.
Cable fault pin-pointer
★ Used for pin-Pointing kinds of cable faults of underground Power cable by using acoustic and magnetic method
★ Can synchronously receive sound and electromagnetic wave when faults point discharges.
★ Receiving signal: vibration and magnetic field signal when the fault point is discharged
★ Magnification, 500,000 times
★ Quiescent current: <10mA
★ Output impedance: 350Ω
★ Positioning accuracy: 0.2m
Cable Route Tracer
★ Specially-designed for detecting the underground cable layout position and underground depth in a certain range
★ Consists of route signal transmitter and receiver
★ Big power output, anti-vibration, strong anti-interference ability, stable and reliable
★ With reliable over current, open circuit and short circuit protection function
★ Output Frequency: Audio Frequency
★ Output signal:intermittent,0~50Vpp
★ Working power supply:220V(1±10%) 50Hz(1±5%)
High voltage Pulse Generator
Other products:
Circuit Breaker Analyzer / Contact Resistance Tester / On Load Tap Changer Tester / Circuit Breaker Vacuum Degree Tester / Insulating Oil Tester / CT PT Analyzer / Transformer Winding Resistance Tester / Sweep Frequency Response Analyzer / Transformer Load and No-load tester / Transformer Ratio Tester / Primary Current Injection Test Set / Frequency Adjustable Series Resonance Test Set / High Voltage Divider / High Voltage Generator / VLF tester / Wireless HV Phase Tester / MOA Metal Oxide Arrester MOA Tester / Hipot Tester / Relay Tester / Insulation Tester / Grounding Resistance Tester
logistics
Certification Show
Company Profile
Customers Visiting
Technical Support
Cable Fault Locator HYCF-2002 can accurately and quickly detect the main insulation failure of power cables with voltage levels of 35KV and below. It can calibrate the length of the cable and accurately detect the direction and depth of the buried cable.
Main technical parameter
| Test range | test distance | 60km |
| detection depth | 6-7m | |
| Measurement accuracy | Pre-location accuracy | + 10m (absolute value) or 1% (relative value) |
| precision measurement accuracy | + 0.2m (pin-pointing, path, depth) | |
| Sampling frequency | 100MHz, minimum resolution 0.5m (100m/us) | |
| Sampling methods | automatic continuous sampling, never miss any discharge waveform | |
| Surge high voltage | 0 ~ 35kV | |
| Short circuit current | 0 ~ 320mA | |
| Short circuit current | 0 ~ 1225J | |
Cable Fault Flash Tester (Cable fault pre-locator)
★ Industrial grade 5.7 LCD display---Angle view>160, Working conditions: temperature: -10 ºC ~ +45 ºC
★ SCM centralized control, push button operation mode,
with strong anti-interference ability.
★ With distance, speed and resistance measurement function.
★ With Micro-printer can print out the wave form and measuring results
★ Automatic continuous sampling and never lose any discharge waveform.
★ Testing method: flashover sampling, low-impulse method.
Cable fault pin-pointer
★ Used for pin-Pointing kinds of cable faults of underground Power cable by using acoustic and magnetic method
★ Can synchronously receive sound and electromagnetic wave when faults point discharges.
★ Receiving signal: vibration and magnetic field signal when the fault point is discharged
★ Magnification, 500,000 times
★ Quiescent current: <10mA
★ Output impedance: 350Ω
★ Positioning accuracy: 0.2m
Cable Route Tracer
★ Specially-designed for detecting the underground cable layout position and underground depth in a certain range
★ Consists of route signal transmitter and receiver
★ Big power output, anti-vibration, strong anti-interference ability, stable and reliable
★ With reliable over current, open circuit and short circuit protection function
★ Output Frequency: Audio Frequency
★ Output signal:intermittent,0~50Vpp
★ Working power supply:220V(1±10%) 50Hz(1±5%)
High voltage Pulse Generator
★ Used for surge discharging of cable faults testing of LV/HV Cable and also used for DC voltage withstand testing of others
electrical device
★ Convenient to use, portable, safety and reliability
★ High voltage pulse output is even and controllable
★ With current and voltage 1.5 pointer display and the surge discharge process is intuitive and clear
★ With zero start protection function, and potentiometer return to Zero output function
★ With DC Withstand voltage test function
★ Humanized design trolley device, easy to move
Other products:
Circuit Breaker Analyzer / Contact Resistance Tester / On Load Tap Changer Tester / Circuit Breaker Vacuum Degree Tester / Insulating Oil Tester / CT PT Analyzer / Transformer Winding Resistance Tester / Sweep Frequency Response Analyzer / Transformer Load and No-load tester / Transformer Ratio Tester / Primary Current Injection Test Set / Frequency Adjustable Series Resonance Test Set / High Voltage Divider / High Voltage Generator / VLF tester / Wireless HV Phase Tester / MOA Metal Oxide Arrester MOA Tester / Hipot Tester / Relay Tester / Insulation Tester / Grounding Resistance Tester
logistics
Certification Show
Company Profile
Customers Visiting
Technical Support